【单针机】如何调节压盘高度

• 屏幕点击机头升降
• Click “Shuttle Adjust”
• 勾选机针解锁
• Tick “Unlock needle machine”
• 然后把压盘摇到最低
• Rotate the press foot to the lowest position
• 此时压盘位置已摇到最低
• Now the press foot is at the lowest position
• 松开压盘调节杆螺丝
• Loosen the screw to adjust the press foot rod
• 压盘调节杆控制上、下高度
• Now you can adjust the press foot height by moving this rod
• 一般放一个三厘的扳手来确定高度的位置即可
• Put a 3mm screw driver between the press foot and press plate to fix the height
• 调整好位置后锁紧螺丝
• Then fasten the screw of the press foot rod.